Electrical connection systems

CJ 20 series joints are single-core, 5 kV to 35 kV, heat shrink joints for XLPE and EPR extruded dielectric, metal tape, wire and lead sheath-shielded power cables. The CJ 20 series joints are supplied with all of the hardware required to shield and externally ground the joint without soldering. Most of the joints can be supplied with either a tube or a wraparound sleeve for the outer jacket.

CJ 320 series joints are three-core, 5 kV to 35 kV heat shrink joints for XLPE and EPR extruded dielectric, metal tape and wire-shielded power cables. The CJ 320 series joints are supplied with three single-core joints plus a railed wraparound sleeve with stainless-steel channels to form a tube.

The CJ 80 series joints are single-core, heat shrink joints for splicing 15 kV and 25 kV jacketed or unjacketed paper and lead-laminated dielectric cable (PILC or VCLC) to itself or to XLP or EPR extruded dielectric, tape, wire-shielded or concentric neutral cable.

CJ LC series joints are single-core, 15 kV to 35 kV, heat shrink joints for XLPE and EPR extruded dielectric, longitudinally corrugated type LC cables. The joints are supplied with all the hardware required to shield and externally ground the joint without soldering. Dual moisture blocked tinned copper braids with constant force springs make the connection of the LC shield across the joint and to ground. The wraparound jacketing sleeve allows for reduced installation space.

The CJ series heat shrink cable joints rated 5 kV through 35 kV are designed for single core and three core non-shielded, metallic tape, wire shielded, concentric neutral, jacketed concentric neutral and LC type shielded cables. Individual designs cover both extruded dielectric (XLP/EPR) and laminated dielectric (PILC/VCLC) power cables. The joints use continuously extruded components for stress control, insulation and the insulation shield. This ensures cable quality consistency. They do not suffer from the potential shot-to-shot variability of molded products. The CJ series joints have redundant seals. The first seal is provided by a heavy wall tube or wraparound sleeve that encapsulates the joint and seals between the cable jackets. The secondary, or redundant seal, is provided by the heavy wall conductive tube that shields and seals the joint to the cables insulation shield

The CJT 80 series joints are trifurcating transition, heat shrink joints for splicing three conductor 15 kV and 25 kV jacketed or unjacketed paper and lead laminated dielectric cable (PILC or VCLC) to three each, single conductor XLP and EPR extruded dielectric, tape, wire shielded, bare or jacketed concentric neutral cables.